Rugged, economical single impeller self-priming pump. These units are driven by either a 182cc Briggs & Stratton “Vanguard” engine, a 163cc Honda GX160 engine and comes with recoil start.

Suitable for: Firefighting Tanker to tanker water transfer High head general water transfer Sheep jetting Irrigation Boom Spraying features & Benefits Pump end designed and manufactured in Australia. Single impeller design provides the versatility of high flow rates with strong pressure. Thrust balanced impeller design to extend engine life.

Pump casing, diffusers and impellers manufactured from quality corrosion resistant marine grade aluminium for long life. 4 way discharge port for easy installation with a choice of plumbing outlets and sizes.

Polyester powder coated pump casing, exterior and interior, for added corrosion resistance. Patented floating impeller neck rings front and back. The front neck ring helps improve pumping efficiency, the back neck ring helps extend seal life and dramatically reduce engine wear. Self-priming from 7m for more versatile installation options. Large priming and drain port with bayonet fit plugs. Plugs have safety retention system, plus are available with 1/4″ tapping to accept pressure gauges or drain cocks. Low-oil protection on all models – engines won’t start or run if oil level is inadequate, thus protecting your engine.

All engines feature cast iron cylinder bore for long life. All engines come with spark arrestors and exhaust deflectors for added safety. Electric start models have electric starter (battery and leads required) and recoil starter fitted, ensures a choice of starting methods, even if the battery is flat or removed. All engines conform to the tough environmental requirements of the USA EPA and CARB standards, to help look after the environment.

Designed for average-sized homes, this dual source controller is specifically designed to source rainwater for applications such as toilets, laundry and garden irrigation offering an automatic mains water back up.

The KRB1 comes with an effective, two-stage HP45-05 pump.

Designed for large-sized homes, this rainwater harvesting kit is among the best of Davey’s automatic rainwater harvesting systems. Enabling priority sourcing of rainwater. This system will only use your mains water system as a backup. Providing a dependable solution to rainwater harvesting.

The KRB2 comes equipped with a powerful, four-stage HS 50-06 pump.

Designed for large multi-storey homes with irrigation systems, as well as commercial buildings or toilet blocks and boasts high pressure for long runs of pipe. Enabling priority sourcing of rainwater, directing it to toilets and laundry.

This system is equipped with a powerful four-stage HM 60-08 pump.

Ideal for backyard rainwater harvesting applications, this SILVER SERIES pump is suitable for a range of applications where pressurised rainwater is required, including:
– Garden watering and irrigation systems
– Vehicle washing
– Filling pools and spas
– Transferring water
This pump has a 35 LPM pumping capacity, and boasts a 2 year onsite warranty

Designed for Metropolitan rainwater harvest to offer a seamless supply of water to Homes, Toilet blocks and Garden irrigation. Automatically switches between rainwater and mains water supply, so you don’t need to think about it.

Ideal for backyard rainwater harvesting applications, this SILVER SERIES pump is suitable for a range of applications where pressureised rainwater is required, including:

• Garden watering and irrigation systems
• Vehicle washing
• Filling pools and spas
• Transferring water

This pump has a 60 LPM pumping capacity, and boasts a 2 year onsite warranty.

Ideal for backyard rainwater harvesting applications, this SILVER SERIES pump is suitable for a range of applications where pressureised rainwater is required, including:

Garden watering and irrigation systems
Vehicle washing
Filling pools and spas
Transferring water
This pump has a 60 LPM pumping capacity, and boasts a 2 year onsite warranty.

Designed for large-sized homes, this rainwater harvesting kit is among the newest of Davey’s automatic rainwater harvesting systems. Enabling priority sourcing of rainwater — directing it to toilets and laundry — this system will only use your mains water system as a backup

To help assist in noise reduction when the system is in operation, the pump is internal rather than external; the RainBank® Kit KRBS2 utilizes a three-stage submersible D53 A/B pump.

Designed for average-sized homes, this rainwater harvesting kit is among the newest of Davey’s automatic rainwater harvesting systems. Enabling priority sourcing of rainwater — directing it to toilets and laundry — this system will only use your mains water system as a backup.

To help assist in noise reduction when the system is in operation, the pump is internal rather than external; the RainBank® Kit KRBS2 utilizes a two-stage submersible D42 A/B pump.

Simply run water over the strip from the nearest tap. The test strip will indicate a green colour in the “safe zone”. Test 24 hours after dosing with Acquasafe to ensure appropriate dosing has taken place. Test after a significant rainfall event – Acquasafe may no longer be at the required concentration. Test a minimum of every 2 to 3 weeks to ensure continuous safety.